Alvdal, Norway

Number and placement of cameras

Earlier we spoke of:
- Two cameras inside each container
- Two - four camera outside each container
- Only alarm if door to container or Office building are breached, Not movement outside at the plot.

Suggestion:
- Suggest that we also use two - four cameras With motion detection inside the Office building. Then we only need to install alarm on the doors, and not all the Windows to.

In the drawing "Plot map Electric" there are two cameras in each corner of the fence. They where not mentiond when we spoke.
I need to know 100% what number of cameras you want, and where you want them placed, before I speak to Relisec. Or I could ask Relisec to give us an suggestion for the best coverage.

Comments & Events

Denis Slabakov, New Mining Company
Jonny,

Please discuss following setup with Relisec.

Containers area

Cameras - two on each corner of the fence - overall eight for the fence, plus radar detectors around the fence, radar detectors should trigger if there is unauthorized movement inside a fenced area.

If we to setup cameras before fence is there, we will install poles in each corner for cameras and radars.

Relisec should not monitor cameras, only radar sensors. If the radar sensor is activated, then Relisec check the cameras and take actions.


Each container will come with one camera installed and connected to the network - model - https://www.ubnt.com/unifi-video/unifi-video-camera-g3-dome/ - Relisec will only need to connect it to local NVR.

Relisec or Osta or any other suitable contractor should install local Norwegian fire sensor inside each container and connect is to fire department.

Office building - two or four cameras with motion detection inside the Office building, plus alarm on the doors.